10 Unexpected Saab 9-3 Key Replacement Tips
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add another key. It requires dealer support using an electronic handheld computer called Tech-2. Then saab replacement keys and transponder are required to be purchased and then programmed to the car.
Change your keys regularly to prevent one from wearing out quicker than another. This will also help to keep your keys in pristine condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the latest keys have electronic components which makes it difficult to copy. This has made stealing cars much more difficult than it was twenty years ago. However, it has made the replacement of lost keys a comparatively expensive endeavor.
Saab 9-3 owners should have two working keys. It is expensive to replace a lost key as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers charge between $100 and $200 to do this.
There are several ways to get around these high cost. Some parts suppliers will use the code of a spare key to cut a brand new metal blade at a fraction the cost of the dealer. The key must be the exact identical to the original one for it to work in your vehicle.
Follow these steps to replace the case. You will need to have a flathead and a lot of patience. With the screwdriver slowly pull the plastic apart and separate the emergency key from the case. Once the case is opened, take out the electronics and put them back into the new case. Make sure you put the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. This YouTube video from Cyclone Cyd demonstrates how to replace the battery of the remote fob with only four steps. This tutorial should work for any modern saab key fob, though the process may vary slightly.
This button is usually located just below the Saab logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Next, use a flathead screwdriver into the small hole inside this button. This should be sufficient to open the fob case so that you can replace the battery.
After you have installed the batteries CR1632, you can put back together the remote key fob. Then, you can program it into your car. The whole process should not take more than an hour. It's a simple process that doesn't require any special tools.
If you lose a key the process is a bit more involved, but it can still be completed. The dealer has to determine the VIN of the car and then order a new key blade and TWICE module that has the exact unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob contains batteries that are used to lock and unlock your vehicle. The batteries last for a period of and will eventually expire. This is a problem that happens to all cars, and the good news is that you can replace the batteries in most fobs, without replacing the whole case. You can buy replacement fobs from Amazon that come with all the electronics already installed, so you'll be able to simply open the case and replace the batteries that were in the case. You'll need to remove the emergency key before you can replace the batteries. To do this, insert a small flathead screwsdriver into the slot in the middle of the. The case will split when you move the screwdriver around it.
If you're looking to replace your keys, keep an extra set on hand. This will save you a lot of money. If you have an extra key, you can ask the dealer to cut it and program it to your car. This is a lot less expensive than buying a new key fob.
If you don't have a spare car key, you can add another key to your car, however this requires a lot of research and effort. Adding a second key costs several hundred dollars and it also requires programming of the car's computer. Professionals can do this however it's a costly option.
Replacement Ignition
The modern SAAB 9-3 uses an alarm system that is more sophisticated based on a key code. If you lose your only key, it may be expensive to add another one since the car must be equipped with a specific computer and be programmed to accept a brand new key. Even a dealer can charge hundreds of dollars to program an additional key in the event that they are unable to do it.
If you've lost your only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to make a replacement, and will charge you a premium price for it. We can reprogramme the existing EEPROM inside your car's computer to make it ready for an extra key. This will save you more than 50% of what you would pay a dealer.
If you've owned a SAAB 9-3 for a long time you are aware that the ignition keys aren't very durable. They can be extremely sticky and the buttons are known to be removed from them at times It is recommended that you consider replacing your ignition key if it isn't functioning properly. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be accomplished in a short time.